Modified Strach

BONDEX EXTRA

The rich experience of Reliable Corporation in starch formulations for wide range of applications in Paper,Textile, Food, Pharma and Oil well drilling industries has been the gateway to the development of BONDEX.

BONDEX is a two components cold water soluble adhesive. BONDEX is designed in a manner that it does not require cooking for the preparation. This product inherently carries the characteristics of modifi­ed starches as an adhesive.

Advantages:

• Available from reputed company with 40 years of manufacturing experience.
• No batch to batch variation in quality.
• Ready-to-use product: It doesn’t require cooking or any other additives at customer end.
• Good Adhesion: After preparation it produces good tack, which results in strong bonding.
• Highly Economical to use as you can mix about 2 times water to bondex.

Strength: Imparts higher compressive strength, busting strength.

Uniform Viscosity: Imparts an excellent low and uniform spreadability enabling the user to use it extensively in automated core making plant.

High Flexibility: can be used in various concentrations from 30 to 45 percent solids according to the application.

No messy gum pot or gum handling equipment.

Typical analysis:

Appearance - White to light yellow powder

Particle size - Pass through 60 mesh

Ash content - 5% max.

Viscosity of 35% gum paste - 1000 -1500 cps

pH of prepared gum - Alkaline

Can be varied as per the application requirements.

POLYBOND is two-component cold water soluble Modified starch powder. It is used for Paper Corrugation and Pasting .

The advantages of using POLYBOND are:

• * POLYBOND is available in Powder form.
• * It is cold water soluble.
• * Generally POLYBOND 1 : 3 to 4 parts of water is used and mixed well for paper corrugation and pasting.
• * No heating is required to prepare adhesive paste/glue.
• * Honey colour prepared paste with no settlement at bottom on storage of prepared glue.
• * Consistent quality and no batch-to-batch variation.
• * No black particles and impurities.
• * POLYBOND is NOT mixed with any cheap filler like clay etc. (This can be easily verified by preparing its paste.
• * POLYBOND paste will be Honey in colour and no settlement will be observed in the gum pot on storage while Starch powder mixed with any cheap filler will be dirty yellow colour and filler will set at the bottom on storage.)
• * This product is significantly stable with excellent flow properties.
• * It has excellent tack at any concentration resulting in formation of fibre tear bond with minimum cure time.
• * Due to smooth flow of the paste, uniform glue spreading resulting in higher mileage and lower consumption of Glue.
• * Prepare adhesive gives good Compress Strength (CD) to the paper.
• * Excellent bonding coupled with shorter drying time enables end user to increase the speed of the M/c and hence higher production.
• * Ease of cleaning M/c parts resulting in lower idle time and labour cost.