Glues & Adhesives

Adhesive synthetic grade 655 PF for Asitrade type of Lamination machine are polymeric base product used for Laminating Flute Board to Printed Board.

These are eco-friendly adhesives free from pthalate, formaline, Heavy Metals etc.

Our Synthetic adhesive is Milky white colour water based eco-friendly adhesive without any solvents. It is used for bonding difficult to bond surfaces such as,

• · PVC tiles/film/sheet or Metallised film to all substrate,


• · Plastic material to porous or even not-porous substrates,


• · Ceramic tiles to Cementitious substrates etc.


• · Printed Paper, Lacquered Paper and Board.

If at least one substrate is porous then direct bonding of two substrate is possible. If not, then adhesive is applied onto one surface and intermediately dry, followed by pasting the other non-polar substrate to it.

Our Acrylic adhesive is white milky water based adhesive which is used for laminating Aluminium foil to Paper by coat-nip-dry process, and also Film to Paper by Coat-dry-nipping process by online machine by dry lamination process.

Pencil Joints are pasted with our adhesive. This water based adhesive is very high viscous emulsion which can be diluted with water and use.

•  Water based 
• Non flammable
•  No health and fire hazard
•  Easy to apply and store
•  Strong bond with membrane and Carved panel. 
• Highly economical to use.

Application Instructions:

 . Substrates must be clean, dry and free from oil and grease. 

.  Apply adhesive on substrate with standard type of hand or electric spray gun or putty spade.

.  Apply the paste in 2-3 beads to the substrate.

.  Wait a couple of minutes before fixing the membrane onto the substrate.

.  Apply pressure using a silicone or steel roller.

. When adhering vertically the paste shall be applied and pressed until a 1 mm bead is visible outside the membrane edge, to seal the splice.

. Make sure that the strip is applied without building in tension and stress to the splice.

1. SUPERBOND SH 100 or SH 110 : is specially formulated water based polymer emulsion of VAM. This is specially formulated for hot pressing process. It is a multi purpose product applicable for manual usage, machine works, Hot pressing, Post forming. It is a PVAc based self cross linking white adhesive and widely used by Interior decorators, Modular Kitchen makers, Furniture manufacturers etc.

2. RELIABLE SUPERBOND GRADE SH 100 : 
Specially formulated water based polymer emulsion of VAM. It is extensively used for bonding gypsum and calcium silicate boards. It is also mainly used for furniture works.

3. RELIABLE SUPERBOND SH: Synthetic adhesive is polymeric base product used in manufacturing spiral wound paper tube to make container of various sizes. It is wood grade and general purpose adhesive for wood works, pattern makers, furniture works, sports goods manufactures, interior decoration etc.

4. RELIABLE SUPERBOND GRADE RB SH : is economical grade widely used as adhesive in furniture making, Artificial flowers, label pasting, lt is purely a product which is economically viable and serves the need.

Price quoted in the Box is only for indicative purpose. Please request for Current Price. 

Synthetic Adhesive grade EFPS is water base ter-polymers in nature. The adhesive complies with European standards and is Eco Friendly. Adhesive does not contain any Pthalate such as DBP, BBP, DEHP, DINP, DIDP, DNOP OR DIBP, Formaldehyde, PVC and other toxic substance, Heavy Metals and is APEO free.

Our Eco-friendly Table Adhesive which complies with European Standard is used as a table adhesive on rotory and flat table printing of garment specially for export.
Packing Available in 1 Kg and 5 Kgs.

Reliable Superbond PS is one of our premium product designed specifically for the Sticker manufacturing Industry, which works well on Screen Applied Sticker Making as well as Machine Applied Sticker Making Industries, hence it is one of the market favourites for a variety of applications.

Reliable Superbond PS is manufactured with utmost care and attention with modern computer aided machineries, which yield repetitive and consistent product quality at all times. It is formulated to achieve greater coverage with higher tack and peel strength at competitive price, hence serving the industry at the best.

We also manufacture ECO-Friendly version of the adhesive under the brand name of Reliable Superbond Eco-PS for consumer requiring eco-friendly adhesive.

Advantages :

Specially formulated PVAcetate based adhesive is viscous milky white colour emulsion which is used on high speed Paper Honey comb plant.

* It gives instant adhesion with fibre tear strength.
* It does not allow fungus or bacterial growth.
* Paper Honey comb produce can be converted to its articles like pellets, doors etc in shortest possible time.

RELIABLE SUPERBOND ADHESIVES are specially formulated water based Tetra polymer emulsion extensively used for lamination of BOPP/Polyester/ PVC film to paper or board.

The following are advantages in using our Lamination adhesives:

• * Uniform pick-up of adhesive on roller.


• * Even distribution of adhesive on Film.


• * No wrinkle, tunneling or star mark even after exposing the laminates to sun or after corrugation.


• * Paper or Board laminated with RELIABLE SUPERBOND Lamination adhesives gives higher gloss.


• * Excellent bonding with fiber tear even on printed surface.


• * Less consumption of adhesive.


• * Easy clean-up of machine and roller after use.


• * Most competitive price.


• * The material is also suitable for Mat Lamination, Maplitho Paper, Art Paper, Art Board.

Adhesives for Manufacturing Envelopes:

1. Relacryl 3500: Adhesive for Body gumming for envelopes made by machines.

2. Relacryl PS: Adhesive for peal seal for art paper envelopes on cold melt peal seal machines.

3. Relasin 611 LV : Adhesive for body / side / gumming for normal envelopes.

4. Relacryl 755WE : Adhesive for pasting window film on envelopes.

5. Relasin 655 HC : Adhesive for envelop pasting applications with high bonding with slow drying.

Millions of women around the world cannot afford sanitary napkins, mainly because they’re manufactured using expensive machinery and thus priced at a premium. Such women resort to an older and cheaper alternative – a piece of cloth or rag. This is an unhygienic alternative and can cause infections, leading to a greater risk of complications in childbirth, and even cancer.

Economical and affordable Machinery for producing Low cost Sanitary Napkins are now invented in India which makes sanitary Napkins affordable to common and specially rural people. This allows small players including Women’s Self Help Groups (SHGs) and budding female entrepreneurs to effectively use this low cost, easy-to-use sanitary napkin manufacturing method that has revolutionized the supply of sanitary napkins to rural and remote areas.

OUR PRODUCT :

We have pleasure in participating in this worthy cause by developing suitable adhesive which is used for construction of Sanitary Napkins. We manufacture adhesive grade Superbond Eco-PS which gives high binding power to the layers of Sanitary Napkins. Unlike Hot Melt Adhesive (HMA):

· our adhesive is easy to apply by brush or roller,

· Gives high coverage area,

· does not require any heating energy,

· very safe to use and clean

· Highly economical to use

Adhesive for Laminated fibre cement, Gypsum boards (FCB), Cement bonded wood particle board ((CWPB) etc are the next generation building products. It adds exciting new design opportunities to the building and inspires life. This eco-friendly product meets the modern day demand of architects and developers alike is the perfect choice for wall cladding and façade needs.

Advantages of Laminated board:

· Water Resistant

· Scratch Resistant

· Acoustic Insulation

· All weather resistant

· Internal External application

· Light weight

· Fire resistant

· 100% Asbestos free

· Termite resistance

· Thermal Conductivity